Solder wires for rework & repair

  1. IR 3 SnAgCu 500g

    IR 3

    lead-free solder wire

    Interflux® IR 3 is an absolutely halide-free, lead-free, no-clean solder wire that has been developed for robot soldering. It provides low spattering, fast wetting, low soldering tip contamination and low residue. IR 3 can also be used for laser and hand soldering with the same advantages.
  2. NH 1 SnAgCu 500g

    NH 1

    Activated solder wire

    new

    Interflux® NH 1 is an activated no-clean colophony free and lead-free solder wire that gives fast and repeatable soldering results on a wide range of surfaces including brass. NH 1 provides fast wetting and low spattering making it particularly suitable for robot and laser soldering but also for normal hand soldering.
  3. RosIX 705 SnAgCu 500g

    RosIX 705

    Activated solder wire

    new

    Interflux® RosIX 705 is an activated rosin based, no-clean solder wire with increased wetting ability in lead-free and SnPb(Ag) alloys. RosIX 705 can be used on surfaces that are difficult to solder like e.g. OSP, Ni, Zn, brass, German silver, ... as well as on degraded and oxidized surfaces.
  4. Aquasol 4018 solder wire SnAgCu 500g

    Aquasol 4018

    Water soluble solder wire

    Interflux® Aquasol 4018 is a high activity solder wire with water soluble residues in SnPb and lead-free alloys. Very good wetting ability on surfaces with poor solderabilty. Residues must be cleaned.
    Residues can be cleaned with DI water at 35°C-45°C (95°F— 114°F).
     OR H1 to EN and IPC standards
     Flux content: 2,5%
  5. IF 14-22 Sn99Qc 500g

    IF 14

    solder wire

    popular

    Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in SnPb(Ag) and lead-free  alloys.
  6. Flexsol 903 solder wire SnAgCu 500g

    Flexsol 903

    lead-free solder wire

    Interflux® Flexsol 903 is an absolutely halide-free, no-clean solder wire with reduced spattering properties in lead-free alloys.
    RO L0 to EN and IPC standards
    Flux content: 2,2% and 3,5%
  7. QF 70 SnCu 500g

    QF 70

    lead-free solder wire

    Interflux® QF 70 is an absolutely halide-free, no-clean lead-free solder wire with fast wetting for fast soldering operations. QF 70 can be used in both hand soldering and automated soldering processes.
  8. LMPA Q Hand Soldering Kit 1

    LMPA-Q hand soldering kit

    soldering kit

    The LMPA-Q hand soldering kit can be used for applications where slow soldering or poor through hole fill with Sn (Ag)Cu alloys are a problem. The hand soldering process with the kit will be faster and through hole fill much easier.