SOLDERING FLUXES
for wave soldering

OSPI 3311M soldering flux

OSPI 3311M

NEW

  • Alcohol based flux

  • For wave soldering

  • Absolutely halide-free

  • High deoxidation power

  • For soldering OSP

Interflux® OSPI 3311M is an alcohol based no-clean flux for soldering OSP finished boards that have passed one or more reflow cycles.

Interflux® OSPI 3311M is an alcohol based no-clean flux for soldering OSP finished boards that have passed one or more reflow cycles.
For lead-free and SnPb processes
OR L0 according to EN and IPC standards
Halide content: 0,00%

IF 2005M

  • Alcohol based

  • For wave soldering

  • Absolutely halide-free

  • High compatibility with conformal coating

  • No-residue ™

Interflux® IF 2005M is the internationally renowned resin- and rosin-free, no-clean / No-residue™ flux standard.

Interflux® IF 2005M is the internationally renowned resin- and rosin-free, no-clean / No-residue™ flux standard.
Interflux® IF 2005M is QPL- listed (approved to MIL-F-14256F).
SnPb and lead-free compatible
Suitable for spray and foam fluxing
OR L0 to EN and IPC standards
Solid content: 1,85% ±0,15
Halide content: 0,00%

IF 2005K

IF 2005K

  • Alcohol based

  • For wave soldering

  • Absolutely halide-free

  • High compatibility with conformal coating

  • Low residue

Interflux® IF 2005K with 2,5% of solids is a resin- and rosin-free, no-clean flux. It can be used when the soldering process needs more activation than IF 2005M provides.

Interflux® IF 2005K with 2,5% of solids is a resin- and rosin-free, no-clean flux. It can be used when the soldering process needs more activation than IF 2005M provides.
SnPb and lead-free compatible
Suitable for spray and foam fluxing
OR L0 according to EN and IPC standards
Solid content: 2,5% ±0,3
Halide content: 0,00%

PACIFIC 2009M

PACIFIC 2009M

  • Water based flux

  • For wave soldering

  • For selective soldering

  • For pre-tinning

  • For spray fluxing

  • Absolutely halide-free

  • High compatibility with conformal coating

  • Low residue

Interflux® PacIFic 2009M is a water based no-clean flux mainly used for wave and selective soldering.

Interflux® PacIFic 2009M is a water based no-clean flux mainly used for wave and selective soldering.
For SnPb and lead-free processes
OR L0 according to EN and IPC standards
Solid content: 3,7% ±0,15
Halide content: 0,00%

PACIFIC 2009MLF

PACIFIC 2009MLF

  • Water based flux

  • For wave soldering

  • For selective soldering

  • For spray fluxing

  • Absolutely halide-free

  • Anti solder ball formation

PacIFic 2009MLF is a water based no-clean soldering flux developed to minimize micro solder ball formation.

PacIFic 2009MLF is a water based no-clean soldering flux developed to minimize micro solder ball formation.
For SnPb and lead-free processes
Main field of use: wave soldering and selective soldering
OR L0 according to EN and IPC standards
Solid content: 3,6% ±0,2
Halide content: 0,00%

PACIFIC 2009MLF-E

PACIFIC 2009MLF-E

  • Water based flux

  • For wave soldering

  • For spray fluxing

  • Absolutely halide-free

  • Reduced residue

  • Reduced solder ball formation

PacIFic 2009MLF-E is a water based no-clean flux which combines low residue levels with reduced micro solder ball formation.

PacIFic 2009MLF-E is a water based no-clean flux which combines low residue levels with reduced micro solder ball formation.
For SnPb and lead-free processes
Main field of use: wave soldering
OR L0 according to EN and IPC standards
Solid content: 3,6% ±0,25
Halide content: 0,00%

PACIFIC 2010F

PACIFIC 2010F

  • Water based flux

  • For wave soldering

  • For spray fluxing

  • For foam fluxing

  • Absolutely halide-free

  • High compatibility with conformal coating

  • Low residue

PacIFic 2010F is a water based no-clean flux for foam fluxing applications.

PacIFic 2010F is a water based no-clean flux for foam fluxing applications.
For SnPb and lead-free wave soldering
OR L0 according to EN and IPC standards
Solid content: 2,5% ±0,15
Halide content: 0,00%

IF 3006

IF 3006

  • Low VOC

  • For wave soldering

  • For selective soldering

  • For pre-tinning

  • Absolutely halide-free

  • High compatibility with conformal coating

Interflux® IF 3006 is a resin- and rosin free, no-clean soldering flux with a reduced VOC content.

Interflux® IF 3006 is a resin- and rosin free, no-clean soldering flux with a reduced VOC content.
For SnPb and lead-free processes
Also for pre-tinning
OR L0 according to EN and IPC standards
Solid content: 3,2% ±0,4
Halide content: 0,00%

AF 4818PbF

AF 4818 PBF

  • Contains rosin

  • Alcohol based

  • For wave soldering

  • For spray fluxing

  • Absolutely halide-free

  • High deoxidation power

  • Long preheat resistant

Interflux® AF 4818 PbF is a solvent based, rosin containing, no-clean soldering flux with increased solid content and a large process window.

Interflux® AF 4818 PbF is a solvent based, rosin containing, no-clean soldering flux with increased solid content and a large process window.
For SnPb and lead-free wave soldering processes
RO L0 according to EN and IPC standards
Solid content: 5%
Halide content: 0,00%

Interflux T2005M thinnerInterflux T2005M thinner

T 2005M

  • Alcohol based

  • Absolutely halide-free

  • For the IF 2005-series fluxes

Interflux® T 2005M is the thinner / conditioner for the IF 2005-series fluxes.

Interflux® T 2005M is the thinner / conditioner for the IF 2005-series fluxes.
When used in foam fluxing or other open flux applications.

AUXILIARIES
for wave soldering

IF 710PSM

IF 710 PSM

peelable solder mask

  • For wave soldering

  • For SnPb(Ag) processes

  • For lead-free processes

  • Fast drying, easily peelable

  • RoHS compliant

Interflux® IF 710 PSM is a natural latex based, fast curing peelable solder mask.

Interflux® IF 710 PSM is a natural latex based, fast curing peelable solder mask.
To shield areas on a PCB from flux and solder wave contact
Easy removal, does not easily break while peeling
Heat resistant
May give a discolouration of Cu when applied on naked Cu or Cu-OSP

IF 910 de-oxidation oil

IF 910

de-oxidation oil

  • For wave soldering

  • For pre-tinning

  • For dipping

  • For SnPb(Ag) alloys

  • For lead-free alloys

Interflux® IF 910 de-oxidation oil separates oxides from good solder in a solder bath.

Interflux® IF 910 de-oxidation oil separates oxides from good solder in a solder bath.
Reduces solder consumption.

Anti-oxidant pellets

ANTI-OXIDANT PELLETS

  • For wave soldering

  • For selective soldering

  • For pre-tinning

  • For SnPb(Ag) processes

  • For lead-free processes

Interflux® Anti-oxidant pellets minimize the formation of oxides on lead-free and SnPb(Ag) solder baths.

Interflux® Anti-oxidant pellets minimize the formation of oxides on lead-free and SnPb(Ag) solder baths.
Used as an addition in the solder bath
For SnPb(Ag) (blue label) or lead-free (green label) alloys
Anti-oxidant pellets are not recommended under closed inert atmospheres
nor for Ni-doped solder alloys.

solder bars

SOLDER BARS

  • For wave soldering

  • For selective soldering

  • For pre-tinning

  • For dip soldering

Interflux® Solder Bars are made from high purity, low oxidation metals in SnPb(Ag) and lead-free alloys.

Interflux® Solder Bars are made from high purity, low oxidation metals in SnPb(Ag) and lead-free alloys.

Solder Grenailles

SOLDER PELLETS

  • For wave soldering

  • For selective soldering

  • For rework & repair

  • For pre-tinning

  • For dipping

Interflux® Solder Pellets are small pieces of solder for easy solder bath filling in lead-free and SnPb(Ag) alloys.

Interflux® Solder Pellets are small pieces of solder for easy solder bath filling in lead-free and SnPb(Ag) alloys.

Size: 1cm x 1cm approx.

Interflux IPA-DI wipesInterflux IPA-DI wipes

IPA/DI WIPES

  • ESD-safe

Interflux® pre-saturated IPA/DI wipes in flip-top tubs and refill bags for general cleaning of surfaces.

Interflux® pre-saturated IPA/DI wipes in flip-top tubs and refill bags for general cleaning of surfaces.
lint-free, non woven fabric
single wipe size: 15 x 21cm
100 pcs/ roll

SPRAY FLUXERS
for wave soldering

ICSF Curve

ICSF CURVE

  • For wave soldering

  • For spray fluxing

  • For Alcohol based fluxes

  • For water based fluxes

  • For rosin based fluxes

The InterSpray Curve series are designed to retrofit all existing soldering machines with a reliable spray fluxer which offers excellent results.

The InterSpray Curve series are designed to retrofit all existing soldering machines with a reliable spray fluxer which offers excellent results.
 
√ Venturi, clog-free spray nozzle
√ Touch screen programming
√ Clean, ergonomic design
√ Special flux pump
√ Encoder calibration function
√ Low level flux alarm

ICSF CURVE 2

  • For wave soldering

  • For spray fluxing

  • For Alcohol based fluxes

  • For water based fluxes

  • For rosin based fluxes

The InterSpray Curve 2 double nozzle series are designed to use 2 different types of fluxes in 1 reliable spray fluxer system.

The InterSpray Curve 2 double nozzle series are designed to use 2 different types of fluxes in 1 reliable system.
 
√ Double Venturi, clog-free spray nozzle
√ Touch screen programming
√ 2 Flux supply modules
√ Clean, ergonomic design
√ Special flux pump
√ Encoder calibration function
√ Low level flux alarm

ICSF Select spray fluxerSoftware for ICSF Select

ICSF Select

NEW

  • For wave soldering

  • For spray fluxing

  • For alcohol based fluxes

  • For water based fluxes

  • For rosin based fluxes

The Revolutionary Selective Jet Fluxer is designed to control the amount of flux for each solder joint without losing the ability to maintain the required cycle time demanded by wave soldering processes.

The Revolutionary Selective Jet Fluxer is designed to control the amount of flux for each solder joint without losing the ability to maintain the required cycle time demanded by wave soldering processes. The Jet technology used replaces completely the need of spray technology. As a result, the ICSF-Select offers a Total Flux Process control needed for today’s more demanding and complicated soldering requirements, especially lead-free processes.
 
√ Environmental friendly
√ Up to 95% less flux usage
√ Less maintenance chemicals
√ Longer life of PCB carriers/pallets
√ Tremendous reduction in flux fumes going into the exhaust/environment
√ Solderability Performance
 
The ability to program points, lines, multi-lines, areas allows the engineer to decide how much flux/pressure is required for certain solder joints up to complete areas. This capability opens up the process window without risking excess of flux residues. Thanks to the XY-movement speed up to 1,500 mm/s, the cycle time will be up to the standard required for wave soldering mass production.

ICSF Solum

ICSF SOLUM

  • For wave soldering

  • For spray fluxing

  • For Alcohol based fluxes

  • For water based fluxes

  • For rosin based fluxes

The InterSpray Stand Alone operate fully independent and open the proces window for critical boards which require precise and controlled fluxing.

The InterSpray Stand Alone operate fully independent and open the proces window for critical boards which require precise and controlled fluxing.
 
√ Venturi, clog-free spray twin nozzles
√ PLC controlled
√ Reliable, pneumatic nozzle movement
√ Spray pressure limits control
√ Automated spray width adjustment

Interflux ICSF Solus standalone spray fluxerInterflux ICSF Solus full cone spray nozzles

ICSF SOLUS

  • For wave soldering

  • For spray fluxing

  • For Alcohol based fluxes

  • For water based fluxes

  • For rosin based fluxes

The InterSpray Stand Alone operate fully independent and open the proces window for critical boards which require precise and controlled fluxing.

The InterSpray Stand Alone operate fully independent and open the proces window for critical boards which require precise and controlled fluxing.
 
√ Venturi, clog-free spray twin nozzles
√ Stepper motor controlled conveyor for continuous and discontinuous fluxing
√ Stepper motor nozzle movement
√ Spray pressure limits control
√ Advanced recipes and data logging controls

Can't find the product? For a complete list of products, check our library

Interflux Electronics Belgium office building
CONTACT
INTERFLUX
HEADQUARTERS

Interflux Electronics NV
Gent zeehaven 3170A
Eddastraat 51
9042 Gent
BELGIUM

Tel.: +32 9251 4959
Fax: +32 9251 4970
info@interflux.com

CONTACT
INTERFLUX WORLDWIDE

Geographical map of the Interflux group

Website by NABU websites