Solder 5 times faster whilst maintaining zero defects
Discover LMPA™
Speed: 30 mm/s
PRODUCTION TOOLS
IF 710 PSM
peelable solder mask
-
For wave soldering
-
For SnPb(Ag) processes
-
For lead-free processes
-
Fast drying, easily peelable
-
RoHS compliant
Interflux® IF 710 PSM is a natural latex based, fast curing peelable solder mask.
Interflux® IF 710 PSM is a natural latex based, fast curing peelable solder mask.
To shield areas on a PCB from flux and solder wave contact
Easy removal, does not easily break while peeling
Heat resistant
May give a discolouration of Cu when applied on naked Cu or Cu-OSP
CLEANING
IF 930
nozzle cleaner
-
For selective soldering
-
For SnPb(Ag) processes
-
For lead-free processes
-
Absolutely halide-free
Interflux® IF 930cleans and de-oxidizes wettable nozzles of selective soldering systems.
Interflux® IF 930 cleans and de-oxidizes wettable nozzles of selective soldering systems.
Safe and easy one-step cleaning
Replaces IF 920
TIP TINNER
-
For rework & repair
-
For SnPb(Ag) processes
-
For lead-free processes
-
Absolutely halide-free
-
Colophony free
Interflux® Tip Tinner cleans and retins tips of soldering irons.
Interflux® Tip Tinner cleans and retins tips of soldering irons.
Increases tip life substantially
Absolutely halide-free
Non abrasive
PURGEL
-
For rework & repair
-
For dispensing
-
Approved for MYDATA MY 500
Interflux® Purgel is a neutral cleaner/conditioner for pumps and valves of dispensing systems.
Interflux® Purgel is a neutral cleaner/conditioner for pumps and valves of dispensing systems.
For preserving dispensing system parts when not in use.
MYDATA MY 500 approved.
IPA/DI WIPES
-
ESD-safe
Interflux® pre-saturated IPA/DI wipes in flip-top tubs and refill bags for general cleaning of surfaces.
Interflux® pre-saturated IPA/DI wipes in flip-top tubs and refill bags for general cleaning of surfaces.
lint-free, non woven fabric
single wipe size: 15 x 21cm
100 pcs/ roll
STENCIL CLEAN WIPES
-
For stencil cleaning
-
Alcohol based
-
ESD-safe
Interflux® pre-saturated stencil clean wipes in flip-top tubs and refill bags for the removal of solder paste and non cured SMT adhesive from stencils and tools.
Interflux® pre-saturated stencil clean wipes in flip-top tubs and refill bags for the removal of solder paste and non cured SMT adhesive from stencils and tools.
lint-free, non-woven fabric
single wipe size: 15 x 21cm
100 pcs/ roll
ISC 8020
stencil cleaning fluid
-
For stencil printing
-
Alcohol-based
Interflux® ISC 8020 is a stencil cleaning fluid for stencil printers.
Interflux® ISC 8020 is a stencil cleaning fluid for stencil printers.
For the removal of solder paste and uncured SMT adhesives.
SOLDER BATH TREATEMENT
IF 910
de-oxidation oil
-
For wave soldering
-
For pre-tinning
-
For dipping
-
For SnPb(Ag) alloys
-
For lead-free alloys
Interflux® IF 910 de-oxidation oil separates oxides from good solder in a solder bath.
Interflux® IF 910 de-oxidation oil separates oxides from good solder in a solder bath.
Reduces solder consumption.
ANTI-OXIDANT PELLETS
-
For wave soldering
-
For selective soldering
-
For pre-tinning
-
For SnPb(Ag) processes
-
For lead-free processes
Interflux® Anti-oxidant pellets minimize the formation of oxides on lead-free and SnPb(Ag) solder baths.
Interflux® Anti-oxidant pellets minimize the formation of oxides on lead-free and SnPb(Ag) solder baths.
Used as an addition in the solder bath
For SnPb(Ag) (blue label) or lead-free (green label) alloys
Anti-oxidant pellets are not recommended under closed inert atmospheres
nor for Ni-doped solder alloys.
SOLDER ALLOYS
SOLDER BARS
-
For wave soldering
-
For selective soldering
-
For pre-tinning
-
For dip soldering
Interflux® Solder Bars are made from high purity, low oxidation metals in SnPb(Ag) and lead-free alloys.
Interflux® Solder Bars are made from high purity, low oxidation metals in SnPb(Ag) and lead-free alloys.
PLAIN SOLDER WIRE
-
For selective soldering
-
For pre-tinning
-
For dip soldering
Interflux® plain solder wire for automatic solder feeding on selective soldering systems in lead-free and SnPb(Ag) alloys.
Interflux® plain solder wire for automatic solder feeding on selective soldering systems in lead-free and SnPb(Ag) alloys.
Wire diameter: 2mm/ 3mm
On 4kg/ 1kg spools
4kg spool size: 125mm x 125mm (dia.x length)
SOLDER PELLETS
-
For wave soldering
-
For selective soldering
-
For rework & repair
-
For pre-tinning
-
For dipping
Interflux® Solder Pellets are small pieces of solder for easy solder bath filling in lead-free and SnPb(Ag) alloys.
Interflux® Solder Pellets are small pieces of solder for easy solder bath filling in lead-free and SnPb(Ag) alloys.
Size: 1cm x 1cm approx.
Can't find the product? For a complete list of products, check our library
CONTACT
INTERFLUX
HEADQUARTERS
INTERFLUX
HEADQUARTERS
Interflux Electronics NV
Gent zeehaven 3170A
Eddastraat 51
9042 Gent
BELGIUM
Tel.: +32 9251 4959
Fax: +32 9251 4970
info@interflux.com
CONTACT
INTERFLUX WORLDWIDE
INTERFLUX WORLDWIDE
©2012 All rights reserved by Interflux® Electronics N.V.
Website by
NABU websites