Products for hand soldering
Soldering fluxes for hand soldering
-
TerrIFic RP65
TerrIFic RP65 is a no-clean water based soldering flux for selective fluxing applications, typically used in hand soldering and rewok and repair.
-
IF 6000
Interflux® IF 6000 is a rosin containing, no-clean soldering flux with increased process window for selective fluxing applications, typically used in hand soldering and rework and repair.
-
IF 8001
Interflux® IF 8001 is a solvent based, no-clean soldering flux with low residue formation for selective fluxing applications, typically used in hand soldering and rework and repair.
-
Flux Pen
Several Interflux® fluxes are available in a flux pen. The refillable flux pen has a very fine glass fibre tip that allows flux application only on the solder joint which avoids flux residue in the surrounding area giving esthetically clean soldering results. The non refillable flux pen is more economic.
Standard fluxes that are available in the flux pen: IF 8001, IF 6000, TerrIFic RP 65, IF 2005M, IF 2005C.
-
RA 25050
Interflux® RA25050 is an activated rosin based no-clean soldering flux. RA25050 can be used for surfaces with poor solderability. RA25010 and RA25015 are less activated than RA25050.
-
RA 25015
Interflux® RA25015 is an activated rosin based no-clean soldering flux. RA25015 can be used for surfaces with poor solderability. RA25010 is lower activated and RA25050 is more activated than RA25015.
-
RA 25010
Interflux® RA25010 is an activated rosin based no-clean soldering flux. RA25010 can be used for surfaces with poor solderability. RA25015 and RA25050 are more activated than RA25010.
Auxiliaries for hand soldering
Solder wires for hand soldering
-
IR 3
Interflux® IR 3 is an absolutely halide-free, lead-free, no-clean solder wire that has been developed for robot soldering. It provides low spattering, fast wetting, low soldering tip contamination and low residue. IR 3 can also be used for laser and hand soldering with the same advantages.
-
QF 70
Interflux® QF 70 is an absolutely halide-free, no-clean lead-free solder wire with fast wetting for fast soldering operations. QF 70 can be used in both hand soldering and automated soldering processes.
-
Aquasol 4018
Interflux® Aquasol 4018 is a high activity solder wire with water soluble residues in SnPb and lead-free alloys. Very good wetting ability on surfaces with poor solderabilty. Residues must be cleaned.
Residues can be cleaned with DI water at 35°C-45°C (95°F— 114°F).
OR H1 to EN and IPC standards
Flux content: 2,5% -
LMPA-Q hand soldering kit
The LMPA-Q hand soldering kit can be used for applications where slow soldering or poor through hole fill with Sn (Ag)Cu alloys are a problem. The hand soldering process with the kit will be faster and through hole fill much easier.
-
RosIX 705
Interflux® RosIX 705 is an activated rosin based, no-clean solder wire with increased wetting ability in lead-free and SnPb(Ag) alloys. RosIX 705 can be used on surfaces that are difficult to solder like e.g. OSP, Ni, Zn, brass, German silver, ... as well as on degraded and oxidized surfaces.
-
NH 1
Interflux® NH 1 is an activated no-clean colophony free and lead-free solder wire that gives fast and repeatable soldering results on a wide range of surfaces including brass. NH 1 provides fast wetting and low spattering making it particularly suitable for robot and laser soldering but also for normal hand soldering.
-
IF 14
Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in SnPb(Ag) and lead-free alloys.
-
Flexsol 903
Interflux® Flexsol 903 is an absolutely halide-free, no-clean solder wire with reduced spattering properties in lead-free alloys.
RO L0 to EN and IPC standards
Flux content: 2,2% and 3,5%
