Solder 5 times faster whilst maintaining zero defects
Discover LMPA™
Speed: 30 mm/s
LEAD-FREE
Solder Wires
QF 70
NEW
-
Increased wetting speed
-
Transparent residue
-
Absolutely halide-free
Interflux® QF 70 is an absolutely halide-free, rosin based no-clean solder wire with fast wetting for fast soldering operations in lead-free alloys.
Interflux® QF 70 is an absolutely halide-free, rosin based no-clean solder wire with fast wetting for fast soldering operations in lead-free alloys.
QF 70 can be used in both hand soldering and auto-mated soldering processes
RO L0 to IPC and EN standards.
Halide content 0,00%
NH 1
NEW
-
Increased wetting ability, increased wetting speed
-
Low spattering
-
Colophony free
-
Low transparent residue
-
High repeatability
-
Perfect for laser soldering
Interflux® NH 1 is a no-clean colophony free activated solder wire that gives fast and repeatable soldering results on a wide range of surfaces including brass, in lead-free alloys.
Interflux® NH 1 is a no-clean colophony free activated solder wire that gives fast and repeatable soldering results on a wide range of surfaces including brass, in lead-free alloys.
NH 1 can be used in both hand soldering and auto-mated soldering processes
RE L1 to IPC and EN standards.
RosIX 705
NEW
-
Increased wetting ability
-
Non disturbing smell
-
High repeatability
-
Smooth transparent residue
-
Suitable for robot soldering
Interflux® RosIX 705 is an activated rosin based, no-clean solder wire with increased wetting ability on surfaces that are difficult to solder in lead-free alloys.
Interflux® RosIX 705 is an activated rosin based, no-clean solder wire with increased wetting ability on surfaces that are difficult to solder in lead-free alloys.
RosIX 705 can be used on surfaces that are difficult
to solder, e.g. OSP, Ni, Zn, brass, German silver, etc.. as well
as on degraded and oxidized surfaces.
RO L1 to IPC and EN standards.
AQUASOL 4018
-
Water soluble solder wire
-
Lead-free solder wire
-
For rework & repair
-
Absolutely colophony free
-
High activity
Interflux® Aquasol 4018 is a high activity solder wire with water soluble residues in lead-free alloys.
Interflux® Aquasol 4018 is a high activity solder wire with water soluble residues in lead-free alloys.
Very good wetting ability on surfaces with poor solderabilty
Residues must be cleaned
Residues can be cleaned with DI water at 35°C-45°C (95°F— 114°F)
OR H1 to EN and IPC standards
Flux content: 2,5%
IF 14 SERIES LEAD-FREE
-
Lead-free solder wire
-
For rework & repair
-
Brushable residue
-
Absolutely halide-free
-
Absolutely colophony free
-
Low residue
Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in lead-free and SnPb(Ag) alloys.
Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in lead-free and SnPb(Ag) alloys.
Residues brushable by hand
RE L0 to EN and IPC standards
Lead-free : IF 14-16 and IF 14-22 (1,6% and 2,2% of flux content)
SnPb(Ag) : 0,6%, 0,9%,1,0% and 1,4% of flux content
FLEXSOL 903
-
Lead-free solder wire
-
For rework & repair
-
Colophony containing
-
Absolutely halide-free
-
Low spattering
Interflux® Flexsol 903 is an absolutely halide-free, no-clean solder wire with reduced spattering properties in lead-free alloys.
Interflux® Flexsol 903 is an absolutely halide-free, no-clean solder wire with reduced spattering properties in lead-free alloys.
RO L0 to EN and IPC standards.
Flux content: 2,2% and 3,5%
LEAD-
BASED
Solder Wires
BASED
RosIX 705 SnPb(Ag)
NEW
-
Increased wetting ability
-
Non disturbing smell
-
High repeatability
-
Smooth transparent residue
-
Suitable for robot soldering
Interflux® RosIX 705 SnPb(Ag) is an activated rosin based, no-clean solder wire with increased wetting ability on surfaces that are difficult to solder in SnPb(Ag) alloys.
Interflux® RosIX 705 SnPb(Ag) is an activated rosin based, no-clean solder wire with increased wetting ability on surfaces that are difficult to solder in SnPb(Ag) alloys.
RosIX 705 SnPb(Ag) can be used on surfaces that are difficult to solder, e.g. OSP, Ni, Zn, brass, German silver,... as well as on degraded and oxidized surfaces.
RO L1 to IPC and EN standards.
IF14 SERIES SnPb(Ag)
-
SnPb(Ag) solder wire
-
For rework & repair
-
Brushable residue
-
Absolutely halide-free
-
Absolutely colophony free
-
Low residue
Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in SnPb(Ag) and lead-free alloys.
Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in SnPb(Ag) and lead-free alloys.
Residues brushable by hand
RE L0 to EN and IPC standards
SnPb(Ag) : IF 14-06, IF 14-09, IF 14-10, IF14-14 (0,6%, 0,9%,1,0% and 1,4% of flux content)
Lead-free : 1,6% and 2,2% of flux content
Can't find the product? For a complete list of products, check our library
CONTACT
INTERFLUX
HEADQUARTERS
INTERFLUX
HEADQUARTERS
Interflux Electronics NV
Gent zeehaven 3170A
Eddastraat 51
9042 Gent
BELGIUM
Tel.: +32 9251 4959
Fax: +32 9251 4970
info@interflux.com
CONTACT
INTERFLUX WORLDWIDE
INTERFLUX WORLDWIDE
©2012 All rights reserved by Interflux® Electronics N.V.
Website by
NABU websites